DYN UNI P48 SET
DYN UNI SET
DYN UNI P48
DYN UNI
SCHERTLER’s DYN P48 series contact microphones are high-end transducers designed for professional applications. Suitable for use on a variety of instruments in both live/amplified and studio environments, these fully-balanced, active, dynamic contact microphones can be safely applied to even the most valuable of instruments using the special adhesive putty provided. The microphones can be quickly transferred between instruments during performances or recording sessions. Once in place, their lightweight design makes them unobtrusive to the performer.
A balanced XLR connector enables direct connection to a microphone input on a mixing console, or a full range amplification system. (Note: these contact microphones require 22-48V phantom power, with the exception of the passive DYN UNI.) The torsion-resistant, Kevlar-reinforced cable is designed to withstand the rigors of daily use while delivering best possible performance results.
SCHERTLER DYN P48 series microphones all feature built-in Class-A preamps and advanced filtering technology that enables each microphone to capture the best tonal qualities of the intended instrument.
The DYN UNI P48 has a linearized frequency response enabling it to be successfully used with a range of different instruments. Includes padded bag and special adhesive putty.
The DYN UNI is a fully balanced, passive dynamic contact microphone that is suitable for use on a variety of instruments. It does not include an active preamp and therefore requires no phantom power. The microphone can be safely applied to even the most valuable of instruments using the special adhesive putty provided. It can also be quickly transferred between instruments during performances or recording sessions. Once in place, the microphone’s lightweight design makes it unobtrusive to the performer.
The DYN UNI’s balanced XLR connector enables direct connection to a microphone input on a mixing console, or a full range amplification system. The torsion-resistant, Kevlar-reinforced cable is designed to withstand the rigors of daily use while delivering best possible performance results. This microphone features passive filtering technology, enabling it to be successfully used with a range of different instruments.
- Transducer type
- Electro-dynamic moving coil active contact microphone
- Mechanical decoupling
- Butterworth 2nd order, Q = 0.6
- Frequency Response (@ ±3dB) - filtered *
- 20 to 16 kHz
- Sensitivity
- ca. -30 dBu
- Dynamic range
- 139 dB
- Output impedance (@ 1 kHz)
- 280 Ω
- Operating voltage
- 22 - 48 VDC
- Built in preamp
- Yes all Class-A
- External preamp
- No
- Contacts
- All hard gold plated 0.5 mm
- For fixed installations
- No
- Removable
- Yes
- Connection
- XLR balanced
- Cable Length
- 4 m
- Note *
- Output frequency response is filtered electronically to better match the specific application.
- Transducer type
- Electro-dynamic moving coil contact microphone
- Mechanical decoupling
- Butterworth 2nd order, Q = 0.6
- Frequency Response (@ ±3dB) - filtered *
- 40 to 14 kHz
- Sensitivity
- ca. -38 dBu
- Dynamic range
- 139 dB
- Output impedance (@ 1 kHz)
- 380 Ω
- Operating voltage
- No (passive)
- Built in preamp
- No (passive)
- External preamp
- No
- Contacts
- All hard gold plated 0.5 mm
- For fixed installations
- No
- Removable
- Yes
- Connection
- XLR balanced
- Cable Length
- 4 m
- Note *
- Output frequency response is filtered electronically to better match the specific application.
